• All wiring for trailer lights must be spliced into the wiring harness ahead of the Panacea control module
• If the rear of the motorcycle is equipped with any incandescent lights that were not original equipment, such lights must be spliced into the wiring harness ahead of the Panacea control module. Police models are often equipped with additional lights not found on their civilian counterparts. Be aware that these lights must be rewired, removed, or converted to L.E.D. prior to installing a Panacea system
• Installation of Panacea Taillights and Turn Signal inserts may be in violation of FMVSS #108
• Panacea Taillights can be used on '97-'01 Dynas, '96-'01 Fat Boy and FXST (ex. Deuce) and '99-'01 XL models, but they must be used with stock turn signals. Panacea turn signals are not available for these applications.

Running Mode:
Your taillight and turn signals are all illuminated RED

Turn Signal Activated:
A flashing amber arrow appears on the appropriate side of the taillight and the selected turn signal flashes amber

Brake Activated:
Three-pulse "flashes" and then your taillight and turn signals remain brightly lit RED until the brake is released. Amber arrow and turn signal will continue to flash during braking function

To Order:

• Select a Panacea Taillight from the options listed for your specific application
• Select wiring components/adapters are required where listed. Alarm Compatible Load Equalizer is only required if equipped with factory alarm
• Select Panacea Rear Turn Signal Inserts from the options listed for your application
• Select L.E.D. Front Turn Signal Conversions (optional) for your specific application

TECH TIP:
Küryakyn Panacea lighting or Run-Turn-Brake Controllers are not compatible with H-D® accessory or other aftermarket modules. Make sure all such modules have been removed before our Panacea lighting or Run-Turn-Brake modules are installed.

NOTE: See FITMENT GUIDE for specific application